Showing 1–40 of 46 results
Formally called the Center High Mounted Signal Light (CHMSL), or center tail light for short. This is the clear version. It fits the DB9/DBS volante, V8/V12 Vantage, Rapide, and others.
This item is new and unused. The product picture is for example to show what product is for sale (circled in black in the image).
Trunk struts for a first-generation Vanquish (MY01-06).
These are sold as a pair. One order will contain both struts needed for the trunk lid.
This item is new and unused.
Want to change up the look of your V8 or V12 Vantage? Switching out the standard 8-bar grille with this 6-bar version is a quick and easy way to give the early V8 Vantage a sportier look. Or, the 6-bar grille can replace the carbon fiber framed mesh grille that came on the V12 Vantage S to give that car a more classic style. Or or, you might just want to change the finish or replacement. Whatever the reason, we’ve got you covered!
The main product picture shows a comparison of the 6-bar and 8-bar grilles. This is the 6-bar grille used on the later V8 Vantage. Click here for the 8-bar versions.
See Ordering Notes and Shipping below for more information.
OEM 8-bar grille from Aston Martin.
The main product picture shows a comparison of the 6-bar and 8-bar grilles. This is the 8-bar grille used on the earlier V8 Vantage. Click here for the 6-bar versions.
See Ordering Notes and Shipping below for more information.
These side sills from AMR are FULLY carbon fiber. Originally used on the Vantage N24 and GT4 race cars, then later used for the AMR Aero Kit, these fit all “Gaydon Era” V8 and V12 Vantages from 2005 to 2018.
These are sold as a complete set: Both side sills and both margin seals are included.
The entire side sill is carbon fiber, though it’s common to see the main portion painted while the “rib” is left exposed in bare carbon to accentuate the look – you can see that on my personal V8 Vantage in the product pictures.
A truly lightweight grille, this mesh version from AMR is as simple as it gets with one goal in mind: weight loss! The AMR grille does away with the slats and brackets of the standard grilles and the carbon fiber frame of the V12 Vantage S grille. There’s also a matching lower grille in the same hex pattern if you’d like to have both front grilles matching.
It fits all “Gaydon era” V8 and V12 Vantages from 2005-2018.
See Ordering Notes and Shipping below for more information.
A subtle upgrade for your Aston Martin, these badges have black detail instead of the standard green. They include new self-adhesive backing so installation is very easy.
These are sold individually, so please order two if you want one for both your hood (bonnet) and trunk (boot).
Want to add front and rear cameras to your pre-MY14 Gaydon-era Aston Martin? Here’s what you need!
Supplied by the experts over at Aston Installations, this camera package will allow you to add front and rear cameras to your Aston Martin without also adding an Infotainment Upgrade Kit, which has them as an add-on option.
The early V8 Vantages came with an 8-bar grille. The part was later revised to 6 bars to give it a more sporty look. The Carbon Edition black grille gives an even more sporty look by getting rid of the bright finish of the standard grille in lieu of black.
See Ordering Notes and Shipping below for more information.
The black-trimmed tail lights with clear lenses (shown installed on my grey V8 Vantage in the product picture) are a direct replacement for the tail lights found on most Gaydon-era Aston Martins.
See below for a description of each option.
Want to convert the red tail lights on your “Gaydon Era” Aston Martin to the clear ones? These OEM tail lamp kits from Aston Martin have everything you need! Included in this package price is everything needed for installation.
These are the grey-trimmed tail lights with clear lenses, which were introduced on the V8 Vantage N400 (shown installed on my red V8 Vantage in the product picture).
This set includes three clear lights: the two tail lights and the center light (AKA “third brake light”). Check the details below for more fitment information. These are sold as a package and the items included cannot be separated unless otherwise listed on their own.
The convertible roof module (CRM) in an Gaydon-era Aston Martin is a bit notorious for failing and causing a bunch of electrical gremlins and warnings unrelated to the roof.
Luckily, it’s easy to replace on your own.
Doors not staying open? It’s time to replace the gas struts for your doors!
These gas door struts (AKA “door check arms”) are OEM items from Aston Martin. They fit the 2019+ Vantage.
These are sold as a pair. One order is needed per car.
Doors not staying open? It’s time to replace the gas struts for your doors!
These gas door struts (AKA “door check arms”) are OEM items from Aston Martin. They fit the 2017+ DB11 and 2019+ DBS Superleggera.
These are sold as a pair. One order is needed per car.
Doors not staying open? It’s time to replace the gas struts for your doors!
These gas door struts (AKA “door check arms”) are OEM items from Aston Martin. These are sold as a pair. One order is needed per car.
The rear door was previously part number AD43-26826-AE.
Doors not staying open? It’s time to replace the gas struts for your doors!
These gas door struts (AKA “door check arms”) are OEM items from Aston Martin. These are sold as a pair. One order is needed per car. They fit most Gaydon-era cars (V8/V12 Vantage, DB9/DBS, Virage, etc, but not Rapide or Vanquish).
Want to change these out yourself? Check out the Redpants DIY Guide for instructions!
Beautiful, hand-crafted carbon fiber from the experts at ECPS!
These fit all V8 and V12 Vantages. They are sold as a pair, so one order will include a side strake for each side of the car. These are fairly easy to install using my DIY guide for them.
See the Ordering Notes below for more information about delivery timeframes for ECPS products.
Beautiful, hand-crafted carbon fiber from the experts at ECPS!
Aston Martin replaced the traditional slatted grille with a more sporty and aggressive design on the V12 Vantage S. It’s a direct swap onto any other V8 or V12 Vantage, but comes at a massive price. Luckily for us, ECPS make their own version of it at a far lower price while still maintaining incredible quality!
See the Ordering Notes below for more information about delivery timeframes for ECPS products.
Beautiful, hand-crafted carbon fiber from the experts at ECPS!
A popular modification to do is change out the body-colored tail light infill trim pieces with ones made of carbon fiber. They’re offered by Aston Martin but you can get a set from ECPS for a much lower price!
These are sold as a pair, so only one order is needed per car.
See the Ordering Notes below for more information about delivery timeframes for ECPS products.
Personalize your Aston Martin with these customizable plaques!
You can put just about anything on them, space and detail allowing. Or you can just get a replica of your original items to freshen up their look, especially if you’re doing it at the same time as a set of new door sill scuff plates or an engine slam panel.
See below for ordering notes and more information.
(Also, don’t mind any smudges on the product pictures, that was just my grimy fingers…)
This is a made-to-order product.
The front valance on many cars can be considered a wear item. That is, over time it’ll see enough bumping and scraping that it’ll have to be replaced. The front valance on the early V8 Vantage is one of them.
It’s a thin, black plastic trim piece that runs through the bottom lip of the front bumper fascia. It’s held in place with some screws, so it’s easy to replace when the time comes.
If the fuel filler door of your V8 Vantage Roadster isn’t working properly, the problem might be the gas strut that props it open.
Replacing it yourself? Check out my video showing how to do it!
This hex-pattern lower front grille matches the AMR Lightweight Grille and fits the V8 Vantage S and “post-facelift” (2012+) V8 Vantage.
There are two versions available: with or without front parking sensors (PDC).
Note: Product pictures show the pre-facelift version. This product listing is for the post-facelift version.
This hex-pattern lower front grille matches the AMR Lightweight Grille and fits the “pre-facelift” 2005-2011 V8 Vantage.
There are two versions available: with or without front parking sensors (PDC).
Hood not staying open on its own? That means the gas struts that hold it open are worn out and need to be replaced. These gas struts (AKA “gas spring assemblies”) are OEM items.
These OEM items are sold as a pair. One order includes two struts.
Replacing these yourself? Check out the Redpants DIY guide for help with installation!
Hood not staying open on its own? That means the gas struts that hold it open are worn out and need to be replaced. These gas struts (AKA “gas spring assemblies”) are OEM items.
These OEM items are sold as a pair. One order includes two struts.
Replacing these yourself? Check out the Redpants DIY guide for help with installation!
Hood not staying open on its own? That means the gas struts that hold it open are worn out and need to be replaced. These gas struts (AKA “gas spring assemblies”) are OEM items.
These OEM items are sold as a pair. One order includes two struts. Replacing these yourself? Check out the Redpants DIY guide for help with installation!
Hood not staying open on its own? That means the gas struts that hold it open are worn out and need to be replaced. These gas struts (AKA “gas spring assemblies”) are OEM items.
These OEM items are sold as a pair. One order includes two struts. Replacing these yourself? Check out the Redpants DIY guide for help with installation!
The N420 V8 Vantage came with a carbon fiber front lip and rear diffuser to set it apart from the standard V8 Vantage. The lip protrudes further than the standard plastic one but is still subtle, adding a nice touch to the front of the car. The rear diffuser is far more obvious and more aggressive than the standard grey plastic diffuser blade.
Fitment is for the “pre-facelift” V8 Vantage made from 2005-2011. This will not fit a car with the updated front and rear bumpers.
These tail lights with red lenses are considered the de-facto “standard” tail lights for a variety of Gaydon-era Aston Martins like the V8/V12 Vantage, DB9/DBS, Virage, and Rapide, and each of their variants. If you want a different look, there are two types of clear-lens tail lights – you can have the clear tail lights with grey trim or with black trim.
See below for a description of each option.
Has one of the vertical support pieces gone missing from your grille? We’ve finally got replacements for them! These pieces are 3D printed and then painted to match the original factory items.
These are sold individually and a few options are available. See Ordering Notes below for more information.
I’m sure we all agree that Astons look far better without a front license plate. Unfortunately, front plates are required in many places. The OEM front license plate plinth is an ungainly thing, so Redpants is offering one that’s slimmer and much more elegant!
Check the Redpants DIY Guide if you want to install this yourself.
One of the quickest, cheapest, and easiest modifications available for the early V8 Vantage is swapping out the comically-long roof antenna for a shorter one.
This can be installed in just a minute without any tools. Check the Redpants DIY Guide to see how it’s done!
Rocks and debris get kicked up by your front tires and sometimes hits your rear quarter panels. Aston Martin is well aware of this, which is why their cars come from the factory with clear vinyl protection film in those areas. A way to further protect your car is with these stone guards, which mount directly behind your front tires.
These OEM stone guards are sold as a pair. One order will include both right side and left side.
Installing new tail lights? I highly recommend replacing all the seals – the original ones will be worn out and likely tear apart when you remove the old tail lights from the car.
See the Kit Options section below for descriptions of each option. (The product image shows the Full Kit option.)
Attempting to repair your tail lights due to condensation? Check out this DIY Guide for information about how to do it. If you’re drilling the tail lights for venting, you’ll need to seal those holes. This Tail Light Repair Kit includes the patches to seal the drill holes, plus new foam seals to properly reinstall the tail light.
Each kit includes patches and seals for one tail light. If you’re doing both of your tail lights, you’ll need to order two of these kits.
Please see the Ordering Notes below for more information.
Also called a “tailgate flip seal,” these rubber seals have a channel in them to help prevent water from pouring into your trunk when you open the trunk lid when wet (say, after it rains or you wash your car).
Installation is done with the adhesive strip made into the seals so all you need to do is clean the trunk lid and stick on the rain seals!
These are sold as a pair, so you only need one order per car.
Trunk not staying open? It’s time to replace the gas struts that hold it open!
These OEM items are sold as a pair. One order includes two struts. Replacing these yourself? Check out the Redpants DIY guide for help with installation!
Trunk not staying open? It’s time to replace the gas struts that hold it open!
These OEM items are sold as a pair. One order includes two struts. Replacing these yourself? Check out the Redpants DIY guide for help with installation!
Trunk not staying open? It’s time to replace the gas struts that hold it open!
These OEM items are sold as a pair. One order includes two struts. Replacing these yourself? Check out the Redpants DIY guide for help with installation!