Redpants Store Front

Showing 81–120 of 229 results

  • ECPS Door Bars (DB9/DBS, Virage, V8/V12 Vantage)

    $0.00$1,510.00

    Beautiful, hand-crafted carbon fiber from the experts at ECPS!

    These door bars are sold as a pair. One order will include both of the door bars needed for one car. The door latches will need to be switched over from the original door bars. The linings on the backside of the OEM door bars are not used with these carbon fiber ones.

    There are two versions available: Type 1 and Type 2. See the Version Types section below for more information.

    Replacing the OEM door bars with new ones is a bit tricky, but I’ve got a DIY Guide to help you out.

    See the Ordering Notes below for more information about delivery timeframes for ECPS products.

  • ECPS Door Sill Scuff Plates (DB9/DBS, Virage, V8/V12 Vantage)

    $0.00$1,000.00

    Beautiful, hand-crafted carbon fiber from the experts at ECPS!

    The door sill scuff plates are one of the first things you see when you open the door of your Aston Martin, so why not add a bit of excitement to them? Not only do these carbon fiber ones look more sporty, the pair also weigh 4 lbs less than the OEM aluminum plates!

    All of these scuff plates are the same style, but designed to fit each car. So, if you have a DB9 with the grooved aluminum sill and embedded leather pad, the ECPS version will eliminate the grooves and pad. Instead, it’ll be a smooth carbon fiber as seen in the product pictures.

    Want to further customize your Aston Martin? Check out these personalized sill plaques to add in with these scuff plates.

    These are sold as a pair, so one order includes a scuff plate for each side of the car, and installing them is a quick and easy job.

    See the Ordering Notes below for more information about delivery timeframes for ECPS products.

  • ECPS Fender Vent Strakes (V8/V12 Vantage)

    $0.00$795.00

    Beautiful, hand-crafted carbon fiber from the experts at ECPS!

    These fit all V8 and V12 Vantages. They are sold as a pair, so one order will include a side strake for each side of the car. These are fairly easy to install using my DIY guide for them.

    See the Ordering Notes below for more information about delivery timeframes for ECPS products.

  • ECPS Front Grille (V8/V12 Vantage)

    $0.00$2,850.00

    Beautiful, hand-crafted carbon fiber from the experts at ECPS!

    Aston Martin replaced the traditional slatted grille with a more sporty and aggressive design on the V12 Vantage S. It’s a direct swap onto any other V8 or V12 Vantage, but comes at a massive price. Luckily for us, ECPS make their own version of it at a far lower price while still maintaining incredible quality!

    See the Ordering Notes below for more information about delivery timeframes for ECPS products.

  • ECPS Shifter Surround

    $0.00$875.00

    Beautiful, hand-crafted carbon fiber from the experts at ECPS!

    Fitment is for the V8 and V12 Vantage, DB9, and DBS with manual transmission.

    Installing it yourself? Check out my DIY Guide!

    See the Ordering Notes below for more information about delivery timeframes for ECPS products.

  • ECPS Tail Lamp Infill Trim

    $0.00$555.00

    Beautiful, hand-crafted carbon fiber from the experts at ECPS!

    A popular modification to do is change out the body-colored tail light infill trim pieces with ones made of carbon fiber. They’re offered by Aston Martin but you can get a set from ECPS for a much lower price!

    These are sold as a pair, so only one order is needed per car.

    See the Ordering Notes below for more information about delivery timeframes for ECPS products.

  • Engine Intake Filters (2nd Century)

    $63.00

    OEM Aston Martin air filters for most 2nd Century cars (DB11, DBS Superleggera, New Vantage, etc).

    These are sold as a pair, so you only need one order per car.

    Scroll down for additional ordering and shipping information.

  • Engine Intake Filters (Gaydon Era)

    $150.00

    OEM Aston Martin air filters for most Gaydon-era cars (DB9/DBS, V8/V12 Vantage, Rapide, Virage, etc).

    These are sold as a pair, so you only need one order per car.

    Looking for reusable mesh filters instead of the OEM paper ones? Check out my Redpants intake filters!

    Scroll down for additional ordering and shipping information.

  • Exhaust Manifold Gaskets

    $27.00

    Exhaust manifold gaskets for the V8 Vantage.

    These are the gaskets that fit between the engine and exhaust manifolds (AKA headers). Aston Martin’s pricing for these skyrocketed so VelocityAP set out to make their own, which keeps the costs far more reasonable for us.

    These gaskets are sold individually. Two must be ordered if replacing them on both sides of the engine.

    Scroll down for additional ordering and shipping information.

  • Exhaust Mid-Pipe Hanger Bushings

    $18.50

    These are the bushings used to hang the exhaust mid-pipes from the chassis. The bushings can wear out over time, allowing the mid-pipes to move more than they should, which could lead to exhaust leaks, noises, or other issues.

    These are sold as a pack of 2. Only one order is needed per car.

    Scroll down for additional ordering and shipping information.

  • Exhaust Spring Bolts

    $18.00$69.00

    These are the spring bolts used to secure the muffler to the mid-pipes.

    Typically only the bolts themselves need to be replaced and the springs can be reused. If the springs aren’t re-usable, they’re also available.

    These are sold as a pack of 4. One order will replace all four bolts and/or springs used for the muffler of one car.

    Scroll down for additional ordering and shipping information.

  • Exhaust Tip Isolators

    $45.00

    OEM ceramic exhaust tip isolators! These fit most Gaydon-era Aston Martins.

    These are sold as a full set – one order contains isolators for both exhaust tips.

    Scroll down for additional ordering and shipping information.

  • Fastener (1R12-642790-AA)

    $6.35

    OEM 8mm scrivet fastener from Aston Martin.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (4G43-17F773-AB)

    $3.85

    OEM clips from Aston Martin.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (4G43-83000-BB)

    $3.95

    OEM M5 speed nuts from Aston Martin.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (4G43-MXC1800-AA)

    $4.00

    OEM fir tree fastener from Aston Martin.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (6G33-FA0115-AB)

    $6.35

    OEM M6 Torx bolt from Aston Martin.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (701157)

    $2.75

    OEM screw from Aston Martin.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (701556)

    $3.70

    OEM M5 Torx bolt from Aston Martin.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (701580)

    $3.95

    OEM dome-head rivet from Aston Martin.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (701581)

    $4.65

    OEM fir tree fastener from Aston Martin.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (702209)

    $7.25

    OEM M10 bolt from Aston Martin.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (702510)

    $6.45

    OEM screw and washer from Aston Martin.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (702511)

    $5.05

    OEM J-nut clip from Aston Martin.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (702514)

    $8.90

    OEM M6 Torx bolt from Aston Martin with pre-applied threadlock adhesive.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (702520)

    $6.25

    OEM clip from Aston Martin.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (703141)

    $11.60

    OEM M8 Torx bolt from Aston Martin with pre-applied threadlock adhesive.

    Sold as a pack of 5.

    Note: These often come with two different types of threadlock on them. I do sort them so they match in the packs I sell, but one pack may differ from another.

    Scroll down for additional ordering and shipping information.

  • Fastener (703156)

    $5.45

    OEM M6 bolt with washer from Aston Martin.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (703172)

    $4.60

    OEM M8 bolt from Aston Martin.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (707620)

    $3.85

    OEM M4 hex nut from Aston Martin.

    Sold as a pack of 5.

    Note: The part number for this item was previously 700986.

    Scroll down for additional ordering and shipping information.

  • Fastener (7G33-108256-AA)

    $5.75

    OEM M8 hex bolts from Aston Martin with pre-applied threadlock adhesive.

    Sold as a pack of 5.

    Scroll down for additional ordering and shipping information.

  • Fastener (Alcantara Fir Tree)

    $9.55$33.85

    OEM fir tree clip with Alcantara cover from Aston Martin. These are very easy to break when removing them from the car so you should expect to replace them when doing a job that involves them, like repairing your headliner.

    Sold as a pack of 2.

    Please verify you have the correct color before ordering. Due to the fragile nature of this product, it is not eligible for return – all sales of this item are final.

    Scroll down for additional ordering and shipping information.

  • FEAD Belt (V12)

    $75.25

    The FEAD belt is a maintenance item on the V12 engines. Like any “serpentine” belt, it should be replaced once its service life has expired.

    Note: The product picture shows the V8 FEAD belt. The item for the V12 is different, so the product delivered will be different than what is shown.

    Scroll down for additional ordering and shipping information.

  • FEAD Belt (V8)

    $117.50

    Front-End Accessory Drive (FEAD) Belt (AKA, serpentine belt) for the 2005-2018 Aston Martin V8 Vantage.

    This FEAD belt is the updated version for use with the updated idler pulley.

    My DIY guide for replacing the idler assembly and FEAD belt on a V8 Vantage can be found here.

    Scroll down for additional ordering and shipping information.

  • Foxwell NT530

    $160.00

    An OBDII reader is one of the most important things to have in your toolbox if you work on your own car. It’ll allow you to read and delete error codes, track live data, and even adjust certain vehicle settings.

    This product listing is for the NT530. Click here for the NT710. Scroll down for more information about the similarities and differences.

    Foxwell OBDII tools from Redpants come pre-loaded with software for Aston Martin!

    Scroll down for additional ordering and shipping information.

  • Foxwell NT710

    $250.00

    An OBDII reader is one of the most important things to have in your toolbox if you work on your own car. It’ll allow you to read and delete error codes, track live data, and even adjust certain vehicle settings.

    This product listing is for the NT710. Click here for the NT530. Scroll down for more information about the similarities and differences.

    Foxwell OBDII tools from Redpants come pre-loaded with software for Aston Martin!

    Scroll down for additional ordering and shipping information.

  • Front Valance

    $307.00

    The front valance on many cars can be considered a wear item. That is, over time it’ll see enough bumping and scraping that it’ll have to be replaced. The front valance on the early V8 Vantage is one of them.

    It’s a thin, black plastic trim piece that runs through the bottom lip of the front bumper fascia. It’s held in place with some screws, so it’s easy to replace when the time comes.

    Scroll down for additional ordering and shipping information.

  • Fuel Filler Door Strut

    $52.50

    If the fuel filler door of your V8 Vantage Roadster isn’t working properly, the problem might be the gas strut that props it open.

    Replacing it yourself? Check out my video showing how to do it!

    Scroll down for additional ordering and shipping information.

  • Fuel Tank Gasket

    $28.50

    OEM Fuel tank gasket for most Gaydon-era Aston Martins (DB9, DBS, V8 Vantage, V12 Vantage, Rapide, etc).

    Scroll down for additional ordering and shipping information.

  • Gear Oil Change Package

    $7.00$67.00

    Cheap and easy insurance to help prevent gear oil leak! Washers and O-rings should always be replaced after they’ve been removed from a car, and that’s the case when replacing the gear oil (AKA transmission fluid) in your Aston Martin’s gearbox. Check the Ordering Options below for more information.

    For a full write-up on how to change the gear oil in an Aston Martin transaxle, check out this DIY Guide.

    There are two options for the 7-speed transmissions. Scroll down for an explanation of which kit fits each transmission.

    Gear oil (transmission fluid) is sold separately.

    Scroll down for additional ordering and shipping information.